Review of Short Phrases and Links|
This Review contains major "Timing Belt"- related terms, short phrases and links grouped together in the form of Encyclopedia article.
- Timing belt is a toothed belt that connects the engine crankshaft to the camshaft or camshafts as you can see in the picture.
- A timing belt is a specific application of a synchronous belt used to transmit rotational power synchronously.
- A timing belt is a precision component with teeth that mesh exactly with its mating sprockets.
- A timing belt is typically rubber with high- tensile fibers (e.g.
- The timing belt is what coordinates the opening and closing of the intake and exhaust valves.
- The term "timing belt" is also used for the more general case of any flat belt with integral teeth.
- A mechanic must remove the timing belt cover to access the valve cover and adjust valves.
- My timing belt and balance shaft belt were just changed at 51,000 miles.
- This potential disaster can be avoided easily and relatively inexpensively by replacing the timing belt within the required replacement interval.
- If the timing belt breaks on an interference engine, mechanical engine damage occurs.
- Failure of the timing belt will seize the engine and often leads to damage that is uneconomic to repair.
- He had the fastest car the first half of the race, but fell back because of a loose wheel and then was sidelined when the timing belt broke.
- I took off the top one half of the timing belt cover and noted the cam at TDC and crank at TDC.
- The first known timing belt was used in 1945. The German Goggomobil microcar was the first mass produced vehicle to use a timing belt in 1950.
- If the timing belt on a non-interference engine breaks, the engine simply stops running.
- The first scheduled tune-up includes water pump inspection, valve adjustment, replacement of the timing belt and new spark plugs.
- The first scheduled tune-up at 100,000 miles includes valve adjustment, timing belt replacement and water-pump inspection.
- It's called a timing belt because it has to be adjusted to rotate the camshaft to keep proper time with the engine so that everything's in sync.
- This arrangement is more complex, and relies on a timing belt or chain, but allows for greater valvetrain flexibility.
- As a result, if a timing belt, chain, or gear slips, valve and piston interference may occur.
- A timing belt, timing chain or cam belt is a part of an internal combustion engine that controls the timing of the engine's valves.
- The OHC system can be driven using the same methods as an OHV system, these methods may include using a timing belt, chain, or in less common cases, gears.
- Timing belt replacement usually requires removal of the engine drive belt that operates the alternator, water pump, power steering pump and air conditioner.
- The oil pump is driven directly from the crank shaft and the waterpump by the timing belt.
- In some engine designs, the timing belt may also be used to drive other engine components such as the water pump and oil pump.
- The timing chain, or timing belt is used to "time" the opening and closing of the valves.
- It's called a timing belt because the valves have to open and close at just the right time.
- If a timing belt breaks, the cam will stop spinning and the piston could hit the open valves.
- Older engines make use of a mechanical fuel pump and valve assembly that is driven by the engine crankshaft, usually from the timing belt or chain.
- The camshaft controls the timing but this is synchronized to the crankshaft by the timing belt which is often referred to as the fan belt.
- Most OHC engines drive the camshaft or camshafts using a timing belt, a chain or multiple chains.
- The timing belt uses the rotation of the engine to drive the camshaft which opens and close the valves.
- The timing belt transfers the rotation of the crankshaft to the camshaft.
- The camshaft is driven by either gears directly from the crank, or more commonly by a timing belt.
- On single and double overhead cam engines, the cams are driven by the crankshaft, via either a belt or chain called the timing belt or timing chain.
- A timing belt or timing chain links the crankshaft to the camshaft so that the valves are in sync with the pistons.
- The camshaft is turned at one half of the crankshaft speed and is driven by the crankshaft, either through gears, timing chain or timing belt.
- Encyclopedia of Finance. > Technology > Engines > Camshaft
- Encyclopedia of Finance. > Technology > Engines > Crankshaft
- Right Time
- Matter > Liquids > Water > Valves
- Oil Pump
Books about "Timing Belt" in